MB Connect Line mbNET Series User Manual

Page 62 of 237
Version: 5.1.6 – June 4
th
, 2019
Configuring for connection over the Internet (continued)
Router Internet dial-in
In the screen shown above, the router is configured to establish an Internet connection as soon as it is restarted
For other methods of Internet dial-in, please see section Network – Internet
 Transmit IP address:
For the client to be able to access the router, it must
know the router’s IP address. Under the configuration
settings made previously, the IP address is sent to the
email address that was provided. This allows you to ac-
cess the router via the IP address.
As the router IP address changes each time it dials in to the Internet, there is an alternative,
which is to use our DynDNS service. For information on setting up and using the MB Connect
Line DynDNS service, please see section Network – DynDNS
Displaying the Internet connection
Assuming that you can access the router, you can see infor-
mation on the status of the Internet connection by clicking
Status – Internet.
For more detailed information on status messages, please see section Status Messages

MB Connect Line mbNET Series Specifications

General

Brand	MB Connect Line
Model	mbNET Series
Category	Network Router
Language	English