Page 171 of 237
Version: 5.1.6 – June 4
th
, 2018
Client settings
Check this box by clicking it if the industrial router is to be enabled as a VPN client.
Enter a name for the client here.
Enter the name or IP address under which the client accesses the server here. Example
123456789@mbNET.mymbnet.biz or 80.187.33.55
This entry is optional.
If the server is not configured to assign an IP address to the client, the client can request the
IP address entered here. The settings are generally made on the VPN server. This setting is
for compatibility with other routers.
Enter the network address of the server in CIDR notation here
(e.g. 192.168.0.0/24) in order to have a route into the server network.
To Next Page
Loading...
Need help?
General
