Page 174 of 237
Version: 5.1.6 – June 4
th
, 2019
20.3.2.1.1 Connection Settings
Check this box to activate the OpenVPN connection.
Enter a name for the connection in the input field.
Select the connection type
Client <> Router Connection via the drop-down field.
Only one “client to network” connection can be created. Depending on the authentication
method, the client receives an IP address from a defined range or each subscriber speci-
fies its requested address.
Example:
Client PC mbNET
[10.1.0.6] VPN – TUNNEL [10.1.0.5] <> ROUTING <> LAN [192.168.0.100]
To Next Page
Loading...
Need help?
General
