Page 65 of 237
Version: 5.1.6 – June 4
th
, 2018
Configuring for connection over the Internet (continued)
From the web interface home page, click Network – Internet
The following site should be displayed.
For a detailed description of the Network – Internet settings, please see section “Network – Internet”
Save your changes by clicking Save Changes.
Finally, to save your changes permanently to the
router, click Apply Changes.
To finish, restart the router.
Here, select to connect over Internet via WAN.
Select Connect immediately.
The connection will be established whenever you restart the router.
You can interrupt the Internet connection by means of a signal to one of the digital
inputs.
Send IP address via
email
Check the box by clicking on it, to have the router’s IP address sent to the email ad-
dress that you will enter below.
When an Internet connection has been established, an email message will be sent to
the email address entered here.
To Next Page
Loading...
Need help?
General
