MB Connect Line mbNET Series User Manual

Page 82 of 237
Version: 5.1.6 – June 4
th
, 2019
Enable
To enable the connection, check the box by clicking on it.
Name
Assign a name to the client.
In the example we used: PPTPclientConnection
Host name or IP
Here, enter the name or IP address that the client uses to contact the server. In the exam-
ple, this is: 123456789@mbNET.mymbnet.biz
Local IP
The server address can be entered here. Generally speaking, this field can be left blank.
Remote IP
Enter the address of the remote station, or the address for a whole network. We recom-
mend entering a network address. In the example: 192.168.0.0/24. Note the CIDR notation
(/24 after the network address)
Authentication
Select an authentication method that is also enabled in the server settings.
Encryption
We recommend selecting MPPE V2 encryption. Note that if you select “none”, your data
will NOT be sent securely.
User & Password
Enter the user name and password of a user who has been added to the PPTP server as a
system user (e.g. ADMIN, without password).
Start connection
on
Select Keep connection. A connection will be established on restart or boot up. It is also
possible to start the connection only for specified events.
.

MB Connect Line mbNET Series Specifications

General

Brand	MB Connect Line
Model	mbNET Series
Category	Network Router
Language	English