Mercury 200 OptiMax Jet Drive

Direct Fuel Injection
Page 3B-56 90-8M0050731 MAY 2011
7. Remove the screws securing the retainers for the fuel hose and air hose at the top of the fuel rails.
a - Water inlet hose to compressor
b - Fuel hose retainer
c - Screw (2)
d - Air hose
e - Air hose retainer
f - Screw (2)
8. Remove the screws securing the retainers for the fuel hose and air hose at the bottom of the fuel rails.
a - Water inlet hose to fuel rail
b - Air hose
c - Fuel hose retainer screw (2)
d - Fuel hose
e - Air hose
f - Air hose retainer screw (2)
g - Fuel hose fitting
a
b
d
e
c
f
16087
16088
a
b
c
d
e
f
g