Pump Unit
Page 5A-4 90-8M0050731 MAY 2011
Bearing Installer 91‑832017
Installs a ball bearing into the drive housing.
Seal Installer 91‑832019T
Installs the pinion shaft seals into the drive housing.
Pinion Gear Height Location Tool 91‑831897
Aids in determining the exact pinion gear height location for the 1.25:1 gear ratio
jet drive. (175–240 hp)
Pinion Gear Height Location Tool 91‑882758
Aids in determining the exact pinion gear height location for the 1.15:1 gear ratio
jet drive. (250 hp)
Seal Protector 91‑850233
Protects the impeller shaft seal during installation.
Impeller Shaft Preload Kit 91‑824871A 1
Applies a preload to the impeller shaft when checking gear lash.
Backlash Indicator Rod 91‑ 53459
10452
Aids in checking gear backlash.
Dial Indicator 91‑ 58222A 1
Used to obtain a variety of measurements including gear backlash, pinion gear
location, and TDC.
Thread Extending Kit 91‑824869A 1
Extends the reach for the dial indicator kit when checking gear lash.
To Next Page
Loading...
Need help?
General
