7-22
20 mm blade SPB-0055 A100883 Additionally processed Olfa-made commercially available
blade (SK2). For cutting works with a thickness of up to 15
mm. SPA-011 use.
Carbide blade 17˚ SPB-0065 A101217 For corrugated fiberboard. SPA-0114 use.
Carbide blade 2˚ SPB-0064 A101209 For sponge 20 mm. SPA-0099 use.
Blade tip adjuster (dial) OPT-C0030 A100068 For SPA-0053
Roll hanger OPT-C0120 A100537 under 150, length 1080 or less, weight 30 kg or less
Vacuum unit OPT-C0129 A100568 120 V, 0.51/0.7 kw filter separately available (OPT-0165)
Vacuum unit OPT-C0130 A100569 220 V, 0.51/0.7 kw filter separately available (OPT-0165)
Vacuum unit OPT-C0131 A100570 240 V, 0.51/0.7 kw filter separately available (OPT-0165)
Vacuum unit OPT-C0193 A101709 120 V, 0.51 kw filter separately available (OPT-0164)
Vacuum unit OPT-C0194 A101710 220 V, 0.25/0.38 kw filter separately available (OPT-0164)
Vacuum unit OPT-C0195 A101711 240 V, 0.25/0.38 kw filter separately available (OPT-0164)
Filter OPT-C0164 A100839 For OPT-C0193, OPT-C0194, OPT-C0195
Filter OPT-C0165 A100840 For OPT-C0129, OPT-C0130, OPT-C0131
Commercially available
pen holder
SPA-0073 A100563 Supports specific commercially available ballpoint pens
Felt mat - - Reciprocal cutter blade receiver, 4 types
Filter element SPC-0226 A100851 For blower filter
To Next Page
Loading...
Need help?
General
