2-38
8. Align the tip of the tool to the upper right point of the
desired cutting area.
Move the tool using the jog keys until the tip of the tool meets the
upper right point (UR) of the cutting area.
Change the head speed or lift/lower the tool when necessary.
9. Enter the UR point.
Press the key to enter the input values. If you do not enter the
input data, press the key.
The step of procedure 4 will be restored on the LCD.
< AREA UR > [ｍｍ]
―６００． ０ ―４５０．０
SPEED FAST >
CUTTER UP >
< AREA UR > [ｍｍ]
３８０． ０ １１２． ０
SPEED FAST >
CUTTER UP >
［LOCAL］ ４ ／ ４
CUT AREA ――― ＞
AXIS ALIGN ――― ＞
TOOL SELECT ――― ＞
To Next Page
Loading...
