Minebea Intec X3 Process Indicator PR 5410 - Page 113

Technical data
Description Data
Transfer rate 10 Mbit/s and 100 Mbit/s
Auto-detection (100, FullDX)
Protocol ProNet I/O
Connection mode Network
Conguration XML le
"GSDML-Vx.xx-Sartorius-PR5410-xxxxxx.xml"
Potential isolation Yes
Cable type Twisted pairs, screened, e.g., patch cable CAT5 Autolink (stra-
ight or crossover)
Cable impedance
150 Ω
Cable length to HUB Max. 115 m
Certicate ProBus Nutzerorganisation e.V. for HMS Industrial Net-
works AB
Certicate no.: Z10931
4 Device installation X3 Process Indicator PR 5410
EN-111 Minebea Intec