Minebea Intec X3 Process Indicator PR 5410 - Page 184

2. Press the [Setup] softkey.
Ticks indicate the progress.
An error message is displayed if communication with the xBPI scale is not
possible!
The following window opens:
The parameters of the xBPI-scale are read into the device.
3. Select [Show device info] with the cursor and conrm.
The following window opens:
4. Change the user ID and SBN address if necessary.
5. Press the softkey to exit the menu and to save the settings.
X3 Process Indicator PR 5410 7 Commissioning
Minebea Intec EN-182