Minebea Intec X3 Process Indicator PR 5410 - Page 213

1. Select [ModBus-RTU] and conrm.
A selection window opens.
2. Select the desired interface and conrm.
The selected interface is displayed.
3. Press the [Param] softkey to set the parameters.
The following window opens:
4. Select [Baudrate] and conrm.
A selection window opens.
5. Select the desired transmission speed and conrm.
6. Select [Parity] and conrm.
7 Commissioning X3 Process Indicator PR 5410
EN-211 Minebea Intec