Minebea Intec X3 Process Indicator PR 5410 - Page 272

If applicable, press the [No] softkey to keep the entered values.
9.1.4.2 Digital inputs and outputs
Open the menu with - [HW-Slots].
A prompt window opens.
7. Press the [Yes] softkey to reset to the factory settings.
8. Press to return to the previous window.
1. Select and conrm the appropriate line.
The "Monitor" test mode is active.
The following window opens.
2. Press the [Stop i/o] softkey.
X3 Process Indicator PR 5410 9 Extended functions
Minebea Intec EN-270