Minebea Intec X3 Process Indicator PR 5410 User Manual

If applicable, press the [No] softkey to keep the original values.
4. Enter and conrm e.g.the value for 20 mA measured by the connected PLC under
[Measured].
A prompt window opens.
5. Press the [Yes] softkey to save the settings.
The following window opens:
6. Press the [Reset] softkey to reset to the factory settings (4 mA and 20 mA).
9 Extended functions X3 Process Indicator PR 5410
EN-269 Minebea Intec

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English