Minebea Intec X3 Process Indicator PR 5410 User Manual

9.2.7.2 Saving an alibi data record
Requirements:
In menu -[Operating parameter][Use alibimemory], the [Gross, Net, Tare] parameter
is selected.
Procedure:
After a weighing operation, press the key or complete lling.
The weight data is written into the alibi memory.
Example:
Operating sequence; see also Chapter 13.4
1 Write request X120 Start printing and save data record
1a Wait X120 = 0
1b Wait X49 (Command active) = 0
1c Check X48 (Command error) = 0
2 Read request D16 Gross weight
3 Read request D17 Net weight
4 Read request D18 Tare weight
5 Read request D19 Sequence number for alibi memory
6 Read request D21 Date (in BCD display)
7 Read request D22 Time (in BCD display)
9.2.7.3 Exporting alibi data records
Example:
Operating sequence; see also Chapter 13.4
1 Write request D19 Sequence number for alibi memory
2 Write request X122 Export selected data record from alibi me-
mory.
2a Wait X122 = 0
1b Wait X49 (Command active) = 0
1c Check X48 (Command error) = 0
2 Read request D16 Gross weight
3 Read request D17 Net weight
4 Read request D18 Tare weight
6 Read request D21 Date (in BCD display)
7 Read request D22 Time (in BCD display)
X3 Process Indicator PR 5410 9 Extended functions
Minebea Intec EN-278

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English