168 MI-42-0001 Rev. 19
MAINTENANCE: Cleaning, Disinfection, and Sterilization
7.4.3 Application of Mineral Oil to AIRO Base Rails
Cleaning Solutions Cleaning solutions used on the base rails must be free of bleach, acetone, and all chemicals that
are potentially corrosive to metals.
Cleaning the Rails If any corrosion on the rails is observed, it must be removed using a very-fine grit Scotch-Brite pad
(or equivalent)
Mineral Oil
Appl
ication
After cleaning, it is required that the rails be immediately dried, and then wiped down with Mineral
Oil Wipes, (Architec Products p/n BLKOILWV or Mobius approved equivalent). The application of
Mineral Oil removes residual cleaning solution and helps protect against corrosion, without affecting
the performance of the rails or bearings.
Figure 138
To Next Page
Loading...