EasyManua.ls Logo

Mobius AIRO Mobile CT System - After Transport; Setting up for Scan

Mobius AIRO Mobile CT System
294 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MI-42-0001 Rev. 19 55
TRANSPORT MODE: Transportation
Crossing
Thresholds
AIRO is designed to pass safely over hospital doorway thresholds and into elevators.
It will not cross barriers higher than 9.5 mm (3/8“).
Using Elevators When using elevators:
Alway
s travel in the elevator with the system.
Transport only yourself and the system. There can be no additional passengers or equipment.
Elevator capacity should be at least 1588 kg (3500 lbs).
Elevator size must be at least 203 cm wide by 165 cm deep (6’8” by 5’5”).
3.3.9 After Transport
Options
3.3.10 Setting Up for Scan
Determine Location
Where to Place the
System
System setup depends on the type of scan being taken or the procedure being performed.
Regardless of the intended procedure, always be aware of the need for audio and visual
communication between operator and patient.
Place the system so the operator and patient can always see and hear each other.
Always place the system so that it can be easily unplugged in case of an emergency.
The system and its controls should not restrict the movement of the medical team.
The Ring must have a clear path for movement. Evaluate the area above the scanner as well as
the sides.
The system ventilation system must not be blocked.
Example: Setup
Dur
i
ng Scan
This diagram is one of many possible setups. The position of AIRO, accessories/compatible
equipment, medical personnel, and the patient varies according to need.
Options See
Setting Up for Scan
Placing the system 3.3.10
Lowering the System 3.3.11
Unlocking and Rotating the Ring 3.3.12
Setting the Orientation for Scanning 3.3.13
Temporary Storage (Park) 3.3.14
Step
Before lowering the system to conduct scans, evaluate the area for optimal placement.

Table of Contents