54 MI-42-0001 Rev. 19
TRANSPORT MODE: Transportation
NOTE: The front-view camera display is only a visual aid to driving. Look around the sides of the
system.
Avoid Collisions Transport this equipment following all safety guidelines.
Employ proper driving techniques to avoid any potentially hazardous situations. The intended
transportation path should be clear of any obstacles when moving in forward or reverse directions.
Never reverse AIRO within 1.0 m of any obstacle.
Hand Position Always drive AIRO holding the hand grips on the sides of the holster.
Stopping To stop at any time, release the direction key.
Brakes AIRO engages its brak
es when stopped.
AIRO is designed with a fail-safe brake to control movement. In the worst-case on a normal use floor
surface, AIRO will stop in less than 1.0 m.
Turning AIRO turns when you manually push left or right on the hand grips. It pivots on its main drive wheel.
NOTE: If you have any doubts about making a turn, stop and evaluate the area first.
Inclines/Declines
The only acceptable position for the system on a ramp is the transport position and
parallel with the direction of the incline or decline.
The Ring must remain latched in transport position. Inclines and declines
must be no more than 5°.
Never unlatch the Ring on a ramp.
Never disable the main drive wheel on a ramp.
Steps
1. Use the display
a to see in front of the system.
2.
Use the buttons
s to drive in forward or reverse.
NOTE: The right and left buttons are not enabled in Transport mode.
To turn, keep holding the hand grips on the holster and push right or left.
To Next Page
Loading...