MI-42-0001 Rev. 19 169
MAINTENANCE: Inspections
7.5 Inspections
7.5.1 Daily
Wear or Damage The responsible organization and personnel using the machine are responsible for performing daily
inspections.
Each day before using the system, inspect it and make sure that:
• No signs of wear or damage appear on the system
• System powers up normally
• Display screen illuminates correctly
• Movement controls operate correctly
• Air filter is unobstructed
If upon inspection the system appears damaged or displays functionality inconsistent with the
functions described in this manual, contact Technical Support. (See section 1.2 Contact Data for
additional information.)
Other Follow the responsible organization’s p
rotocols for inspection. See chapter 8 QUALITY TESTING
for Quality Assurance tests.
Step
Reach down to the air-filter panel on the Gimbal below the Pendant holster, and manually verify
that the filter has no obstruction or debris blocking it.
For Damage or Malfunction
Contact technical support immediately. Mark the system as not for use until evaluated by
technical support.
To Next Page
Loading...