Mobius AIRO Mobile CT System - Selecting Exam Region, Protocol, and Scan Type

96 MI-42-0001 Rev. 19
SCANNING: Typical Scan Sequence: New Scan
6.8.8 Selecting Exam Region, Protocol, and Scan Type
How to Select the
Exam Region,
Protocol, and Scan
Type
After specifying
Patient Type and Patient Category , select Exam Region , Protocol , and Scan
Type
.
NOTES:
•
Helical and Axial scan types are available for all exam regions and protocols.
• The
Neonate Body > Full Body options are only available for the Newborn patient category.
•
Modulated mA is available for Helical scans of all protocols except for Extremities .
•
Modulated mA is not available for Axial , or Scout scans.
Options
•Select
Continue to proceed if the mismatch is known and appropriate.
NOTE: To simplify scan setup for patients that fall outside typical ranges, talk with your
technical service provider about adding customized scan protocols to your AIRO.
•Select
Cancel to select a different patient category.
AIRO returns to the previous screen and provides a list of available categories. See Figure 64
and Figure 65.
NOTE: For information about standard categories, see section How to Choose the Patient
Type and Patient Category on page 93 and the MI-42-0005 Application Guide Protocols and
Principles.
Standard Exam Regions and Protocols
Exam Regions Protocols
Neonate Body Full Body
Head
Head
Sinus
Orbit
Shoulder Shoulder
Chest Chest
Abdomen Abdomen
Pelvis Pelvis
Spine
Cervical
Thoracic
Lumbar
Sacrum
Extremities Extremities