Mobius AIRO Mobile CT System - Electrical Safety; Overview

MI-42-0001 Rev. 19 33
SAFETY: Electrical Safety
2.9 Electrical Safety
2.9.1 Overview
Safety Precautions
To avoid risk of electric shock, the following safety precautions must be observed:
- This equipment must only be connected to a supply mains with protective earth
- Do not attempt to service AIRO. Do not attempt to replace the power line cord. There
are no user serviceable parts.
- Do not remove equipment covers. Do not attempt to override safety features.
- Do not use AIRO in Oxygen Rich environments or with flammable anesthetics.
- Avoid tripping over or driving over the power and network cables as this can damage
them.
- Do not use any electrical cables with damaged insulation or that appear to have been
crushed.
AIRO is not waterproof. Water, soap, or other liquids, if allowed to drip into the
equipment, can cause electrical short circuits leading to electric shock and fire
hazards.
If liquids should accidentally spill into the system, DO NOT apply power or turn the
system on until the liquids have dried or evaporated completely.