MI-42-0001 Rev. 19 11
GENERAL INFORMATION: Training and Documentation
1.7 Training and Documentation
1.7.1 Training
Required Training Users must receive and complete training from Mobius Imaging or its authorized agents before using
AIRO.
For training, contact your distributor or Mobius Imaging.
NOTE: The User Manual does not replace training.
1.7.2 Applications Training
Description Medical personnel that will be operating AIRO shall attend a 5-day applications training course
(recommended minimum). Curriculum must include:
• Training Specialist scheduled for training.
• Training Presentation (including safety information, basic setup and use of the system).
• User’s Manual (hard-copy supplied with system).
• AIRO Mobile CT System (including all components).
• Hands-on training including transportation and maneuvering the system in a simulated typical
environment.
• Trumpf Column hands-on training including table transfer, operational controls, and
programming.
• A test at the end of the training course appropriate to the practice/user.
NOTE: All other users (non-operators) will be trained in the areas relevant to their interactions with
the AIRO CT System. For example, nurses will be trained on patient handling, table controls, and
preparation of sterile fields.
Training Materials Training materials include, but are not limited to:
•
U
ser Manual
• AIRO system
1.7.3 Documentation
Intended Audience This User Manual is intended for all members of the clinical team who are trained in the use of the
AIRO system.
Reading the User
Manual
This User Manual contains the information necessary
to operate AIRO in accordance with its
specifications and intended use.
It is important that AIRO users:
• Read the User Manual carefully as part of training and before attempting to use AIRO.
• Always have access to the User Manual.
Required Training Hours
Applications Training 40 hours or 5 days (recommended minimum)
Refresher Training As requested
To Next Page
Loading...