226 MI-42-0001 Rev. 19
TECHNICAL DESCRIPTION: Labels
Laser Warning Label in compliance with IEC
60825-1:2007
The laser product complies with 21CFR 1040.10
and 1040.11, except for deviations pursuant to
Laser notice No. 50, dated June 24, 2007.
Location: On the base to the left of the sockets
for power and network cables.
Input panel:
a - Potential equalization point
s - Ethernet port for communication with the
image guidance system software from your
navigation system vendor.
d - Ethernet port for communication with the
hospital network.
Ionizing radiation label
Overbalancing Warning Label
High Voltage
Support contact label
• For AIROs with hardwired Pendants, on the
Gantry/Ring just above the Pendant Holster.
• For AIROs with Detachable Pendants, on the
upper pivot housing between the Pendant
Holster and the Ring.
NOTE: The label shown is an example only. The
label on your AIRO may have different contact
information.
Label Explanation
LASER LIGHT. DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
OUTPUT: 3.5mW, 635nm
IEC 60825-1:2007
Complies with 21 CFR 1040.10 and 1040.11, except for
deviations pursuant to laser notice No. 50, dated June 24, 2007
MI-43-0003
AIRO
®
Mobile CT System Support:
Mobius Imaging LLC
2 Shaker Rd, F100
Shirley, MA 01464, USA
Phone: +1-978-608-8313
Toll Free: +1-866-432-1172
MI-43-0114 Rev 1
Email: technicalsupport@mobiusimaging.com
To Next Page
Loading...