Mold-Masters E-Multi EM1 - E-Multi Weight Specifications; Table 3-7 E-Multi Injection Unit Shipping Dimensions and Weight

3.14 E-Multi Weight Specications
Dimensions and weights shown are for packed wooden crates containing
standard-optioned units. Additional options may add weight or require
additional crates. Specications subject to changes without notice.
Table 3-7 E-Multi Injection Unit Shipping Dimensions and Weight
Model Length mm
(in.)
Width mm
(in.)
Height mm
(in.)
Weight kg
(lb)
EM1/EM2 1520 (60) 740 (29) 840 (33) 300 (660)
EM3 2080 (82) 840 (33) 910 (36) 500 (1100)
EM4 3302 (130) 914 (36) 991 (39) 1300 (2860)
ER1-15
1632 (64) 932 (37) 1056 (42)
400 (880)
ER1-30 400 (880)
ER2-50 400 (880)
ER2-80 500 (1100)
ER3-100
Crate 1 3302 (130) 914 (36) 991 (39) 900 (1980)
Crate 2 1543 (61) 975 (38) 670 (26) 700 (1540)
ER3-200
Crate 1 3302 (130) 914 (36) 991 (39) 900 (1980)
Crate 2 1543 (61) 975 (38) 670 (26) 700 (1540)
ER4-350
Crate 1 3302 (130) 914 (36) 991 (39) 1200 (2640)
Crate 2 1543 (61) 975 (38) 670 (26) 700 (1540)
ER4-550
Crate 1 3302 (130) 914 (36) 991 (39) 1300 (2860)
Crate 2 1543 (61) 975 (38) 670 (26) 700 (1540)
EM1/EM2/EM3
Controllers
1702 (67) 788 (31) 1626 (64) 390 (860)
EM4 Controller 1880 (74) 788 (31) 1626 (64) 600 (1330)
3-20
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
SAFETY
E-Multi Controller User Manual