Mold-Masters E-Multi EM1 - Info-Log Screen

7.25 Info-Log Screen
System events (alarms, user changes, system errors, etc.) are recorded in
the Info log. This provides a history of the machine operation.
The Info-Log screen only displays information. Alarms cannot be conrmed
here.
Table 7-41 Info-Log Screen Elements
All system events are shown in the table. A status
line underneath the table shows the entire text of
the selected entry.
Using the menu bar, the entire info log may be
saved or printed out.
The list may be limited to specic system events
using the aid of a lter. This makes it easier to nd
entries.
Figure 7-29 Info-log screen
7-68
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
E-MULTI CONTROLLER HMI INTERFACE
E-Multi Controller User Manual