Motorola G24 Guide User Manual

AT Commands Alphabetical Summary
A-4 AT Commands Reference Manual December 31, 2007
+CCFC
This command enables control of
the call-forwarding
supplementary service.
Page 3-29
+CCLK
This command reads/sets the
G24's current date and time
settings.
Page 3-96
+CCWA
This command controls the Call
Waiting supplementary service,
including settings and querying
of the network by the G24.
Page 3-23
+CDEV
An unsolicited indication
regarding display changes that is
sent to the DTE when the <disp>
parameter of the +CMER
command is set to 1.
Page 3-321
+CEER
This command returns an
extended error report containing
one or more lines of information
text <report>, determined by the
manufacturer, providing reasons
for errors. The errors are call
clearing codes.
Page 3-296
+CFSN
This command displays the
factory serial number.
Page 3-6
+CFUN
This command shuts down the
phone functionality of smart
phones and PDAs with phone
capabilities.
Page 3-204
+CGACT
This command
activates/deactivates the PDP
Context.
Page 3-330
+CGATT
This command attaches the G24
to the GPRS network.
Page 3-330
+CGCLASS
This command sets the GPRS
mobile station class.
Page 3-324
+CGDCONT
This command specifies the PDP
(Packet Data Protocol) context.
Page 3-325
+CGEQMIN This command allows the TE to
specify a minimum acceptable
profile, which is checked by the
MT against the negotiated profile
returned in the Activate/Modify
PDP Context Accept message.
Page 3-346
+CGEQNEG This command allows the TE to
retrieve the negotiated QoS
profiles returned in the Activate
PDP Context Accept message.
Page 3-352
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English