Motorola G24 Guide User Manual

Appendix A: Reference Tables
December 31, 2007 AT Commands Reference Manual A-5
+CGEQREQ This command allows the TE to
specify a EDGE Quality of
Service Profile that is used when
the MT sends an Activate PDP
Context Request message to the
network.
Page 3-340
+CGMI
This command requests
manufacturer identification.
Page 3-1
+CGMM
This command requests the
model identification.
Page 3-2
+CGMR
This command requests the
revision identification.
Page 3-3
+CGPADDR
This command reads the
allocated PDP addresses for the
specified context identifiers.
Page 3-336
+CGPRS
This command indicates whether
there is GPRS coverage.
Page 3-334
+CGQMIN
This command sets the minimum
acceptable quality of service
profile.
Page 3-327
+CGQREQ
This command returns the
requested quality of service
profile.
Page 3-329
+CGREG
This command enables/disables
the GPRS network status
registration unsolicited result
code.
Page 3-171
+CGSMS
This command handles the
selection of the service or service
preference used by the G24 to
send mobile-originated SMS
messages.
Page 3-133
+CGSN
This command requests the
product serial number
identification.
Page 3-3
+CHLD
This command controls the Call
Hold and Multiparty
Conversation supplementary
services.
Page 3-25
+CHUP
This command causes the G24 to
hang up the current GSM call.
Page 3-35
+CIEV
An unsolicited indication
regarding various phone
indications that is sent to the DTE
when the <ind> parameter of the
+CMER command is set to 1.
Page 3-321
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English