Motorola G24 Guide User Manual

AT Commands Alphabetical Summary
A-8 AT Commands Reference Manual December 31, 2007
+COLP
This command refers to the GSM
supplementary service COLP,
Connected Line Identification
Presentation, which enables a
calling subscriber to get the
connected line identity (COL) of
the called party after setting up a
mobile originated call.
Page 3-69
+COPS
This command enables
accessories to access the network
registration information, and the
selection and registration of the
GSM network operator.
Page 3-172
+CPAS
This command returns the current
activity status of the G24, for
example, call in progress, or
ringing.
Page 3-46
+CPBF
This command enables the user
to search the currently active
phone book for a particular entry,
by name.
Page 3-75
+CPBR
This command recalls phone
book entries from a specific entry
number, or from a range of
entries.
Page 3-73
+CPBS
This command selects the
memory that is to be used for
reading and writing entries in
G24s that contain more than one
phone book memory.
Page 3-71
+CPBW
This command enables the user
to store a new entry in the phone
book, or delete an existing entry
from the phone book.
Page 3-76
+CPIN
This command is only relevant
for phones that use SIM cards. It
unlocks the SIM card when the
proper SIM PIN is provided, and
unblocks the SIM card when the
proper SIM PUK is provided.
Page 3-253
+CPMS
This command handles the
selection of the preferred storage
area for messages.
Page 3-99
+CPOL
This command is used to edit the
list of preferred operators located
in the SIM card.
Page 3-175
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English