Appendix A: Reference Tables
December 31, 2007 AT Commands Reference Manual A-9
+CPUC
This command sets the
parameters of the Advice of
Charge-related price per unit and
currency table found in the SIM
file, EFPUCT.
Page 3-60
+CPWD
This command sets a new
password for the facility lock.
Page 3-258
+CR
This command controls whether
or not the extended format of an
outgoing call is displayed or not.
Page 3-61
+CRC
This command controls whether
to present the extended format of
the incoming call indication.
Page 3-19
+CREG
This command enables/disables
the network status registration
unsolicited result code.
Page 3-169
+CRING
This unsolicited event indicates
the type of incoming call.
Page 3-19
+CRLP
This command returns the Radio
Link Protocol parameters.
Page 3-168
+CRSL
This command handles the
selection of the incoming call
ringer and alert tone (SMS)
sound level on the alert speaker
of the G24.
Page 3-232
+CRSM
This command provides limited
access to the Elementary Files on
the SIM.
Page 3-302
+CRTT
This command plays one cycle of
a ring tone, stops the cycle in the
middle, and sets the ring tone to
be used.
Page 3-247
+CSCA
This command handles the
selection of the SCA and the
TOSCA.
Page 3-101
+CSCB
This command handles the
selection of cell broadcast
message types and data coding
schemes received by the G24.
Page 3-135
+CSCS
This command selects the G24
character set.
Page 3-4
+CSDH
This command shows the Text
Mode parameters.
Page 3-106
+CSMP
This command sets the Text
Module parameters.
Page 3-104
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page
To Next Page
Loading...
Need help?
General
