Motorola G24 Guide User Manual

AT Commands Alphabetical Summary
A-10 AT Commands Reference Manual December 31, 2007
+CSMS
This command handles the
selection of the SMS service
type.
Page 3-98
+CSNS
This command handles the
selection of the bearer or
teleservice to be used when a
mobile terminated single
numbering scheme call is
established.
Page 3-36
+CSSN
This command handles the
enabling and disabling of
supplementary service-related,
network-initiated, notifications.
Page 3-62
+CSQ
This command returns the signal
strength received by the G24.
Page 3-167
+CSVM
This command handles the
selection of the number to the
voice mail server.
Page 3-77
+CTFR1
This command terminates an
incoming call and diverts the
caller to the number previously
defined in CCFC, or to a voice
mail if one exists for the
subscriber.
Page 3-39
+CUSD
This command allows control of
Unstructured Supplementary
Service Data (USSD), according
to GSM 02.90.
Page 3-65
+EMPC
This command unlocks or
resets the first PLMN of the
inserted SIM.
Page 3-262
+EPIN
This command is only relevant
for phones that use SIM cards. It
verifies the PIN2 indicator.
Page 3-256
+FAR
This command is supported for
backward compatibility only, and
has no effect.
Page 3-422
+FCL
This command is supported for
backward compatibility only, and
has no effect.
Page 3-422
+FCLASS
This command places the
terminal in particular mode of
operation (data, fax, voice).
Page 3-424
+FDD
This command is supported for
backward compatibility only, and
has no effect.
Page 3-422
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English