Motorola G24 Guide User Manual

Appendix A: Reference Tables
December 31, 2007 AT Commands Reference Manual A-11
+FIT
This command is supported for
backward compatibility only, and
has no effect.
Page 3-422
+FMI
This command requests
manufacturer identification.
Page 3-1
+FMM
This command requests the
model identification.
Page 3-2
+FMR
This command requests the
revision identification.
Page 3-3
+FRH
This command causes the G24 to
receive HDLC framed data and
deliver the next received frame to
the terminal.
Page 3-430
+FRM
This command causes the G24 to
enter the receive mode.
Page 3-428
+FRS
This command causes the G24 to
listen and to report back an OK
result code when the line has
been silent for the specified
amount of time.
Page 3-425
+FTH
This command causes the G24 to
transmit data framed in the
HDLC protocol.
Page 3-428
+FTM
This command causes the G24 to
transmit data.
Page 3-426
+FTS
This command causes the G24 to
stop any transmission.
Page 3-425
+GCAP
This command requests the
overall capabilities of the G24.
Page 3-197
+GMI
This command requests
manufacturer identification.
Page 3-1
+GMM
This command requests the
model identification.
Page 3-2
+GMR
This command requests the
revision identification.
Page 3-3
+GSN
This command requests the
product serial number
identification.
Page 3-3
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English