Motorola G24 Guide User Manual

AT Commands Alphabetical Summary
A-16 AT Commands Reference Manual December 31, 2007
+MIPDATA
This unsolicited event is sent
to the terminal indicating a
data comes from Network
when G24 is in
pseudo-command mode.
Page 3-401
+MIPFLUSH
This command causes the G24
module to flush (delete) data
accumulated in its accumulating
buffers.
Page 3-398
+MIPODM
This command causes the G24
module to initialize a new socket
in Online Data Mode and open a
connection with a remote side.
Page 3-389
+MIPOPEN
This command causes the G24
module to initialize a new socket
and open a connection with a
remote side.
Page 3-387
+MIPPUSH
This command causes the G24
module to push the data
accumulated in its accumulating
buffers into the protocol stack.
Page 3-397
+MIPRTCP
This unsolicited event is sent to
the terminal when data is
received from the TCP protocol
stack.
Page 3-399
+MIPRUDP
This unsolicited event is sent to
the terminal when data is
received from the UDP protocol
stack.
Page 3-399
+MIPSEND
This command causes the G24 to
transmit the data that the terminal
provides, using an existing
protocol stack.
Page 3-395
+MIPSETS
This command causes the G24 to
set a watermark in the
accumulating buffer. When the
watermark is reached, data is
pushed from the accumulating
buffer into the protocol stack.
Page 3-394
+MIPSSL
This unsolicited event is sent to
the terminal indicating an errors,
warnings or alerts that occurred
during SSL connection.
Page 3-419
+MIPSTAT
This unsolicited event is sent to
the terminal indicating a change
in link status.
Page 3-400
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English