Motorola G24 Guide User Manual

Appendix A: Reference Tables
December 31, 2007 AT Commands Reference Manual A-17
+MIPXOFF
This unsolicited event is sent to
the terminal to stop sending data.
Page 3-401
+MIPXON
This unsolicited event is sent to
the terminal when the G24 has
free memory in the accumulating
buffer.
Page 3-402
+MKPD This command enables
accessories to control the press
and release of key presses.
Page 3-312
+MMAD This command reads and
monitors digital value from a
specified ADC.
Page 3-219
+MMAR
This command changes the status
of an SMS message in the G24
memory from "REC UNREAD"
to "REC READ".
Page 3-125
+MMICG
This command handles the
selection of microphone gain
values.
Page 3-246
+MMGL
This command displays a list of
SMS messages stored in the G24
memory.
Page 3-114
+MMGR
This command enables the user
to read selected SMS messages
from the G24 memory.
Page 3-118
+MNTFY
This command enables/disables
unsolicited report of NOTIFY
indication arrived from the NW.
Page 3-53
+MPCMC
This command defines whether
the PCM clock is generated
continuously or not, when
module is in digital audio mode.
Page 3-226
+MPDPM
This command returns the
collective percentage of memory
used by the phonebook and
datebook in their shared dynamic
memory storage.
Page 3-85
+MPING
This command will allow
verifying IP connectivity to
another remote machine
(computer) by sending one or
more Internet Control Message
Protocol (ICMP) Echo Request
messages.
Page 3-405
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English