Motorola G24 Guide User Manual

AT Commands Alphabetical Summary
A-18 AT Commands Reference Manual December 31, 2007
+MPINGSTAT
This is the unsolicited response
that the G24 sends to the terminal
to inform of ping execution status
update and provides summary
statistics of ping request when
ping request execution is
completed.
Page 3-409
+MPSU
This command defines the
functionality of the second
physical UART.
Page 3-211
+MRICS
This command allows
configuring the behavior of RI
line in a case of SMS arrival.
Page 3-142
+MRST
This command enables customer
software to perform a hard reset
to the G24 unit.
Page 3-207
+MSCTS
This command defines the
behavior of the CTS line when
the G24 is in Sleep mode.
Page 3-288
+MSDNS
This command set/read DNS IP
address for each socket.
Page 3-412
+MTCTS
This command sets the CTS pin
of the RS232 to not active (high),
waits one second and then returns
the CTS to active (low).
Page 3-198
+MTDTR
This command checks and
outputs the physical current
status of the DTR pin of the
RS232.
Page 3-197
+MTKC
This unsolicited event notifies the
terminal when supplementary
services, SMS Control or Call
Control are modified.
Page 3-385
+MTKE
This command enables/disables
the SIM ToolKit functionalities.
Page 3-367
+MTKM
This is both a command and an
unsolicited event. The command
selects items from the menu.
Page 3-383
+MTKP
This is both a command and an
unsolicited event. The command
responds to an unsolicited event.
Page 3-368
+MTKR
This command displays the
profile that is downloaded from
the G24 to the SIM during the
SIM initialization process.
Page 3-358
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English