AT Commands Alphabetical Summary
A-20 AT Commands Reference Manual December 31, 2007
AT
This command checks the AT
communication and only returns
OK.
Page 3-252
D
This command places a voice call
on the current network, when
issued from an accessory device.
Page 3-13
D*99
This command enables the ME to
perform the actions necessary for
establishing communication
between the terminal and the
external PDN.
Page 3-332
D>
This command places a
voice/fax/data call on the current
network by dialing directly from
the G24 phone book.
Page 3-14
DL
This command places a voice call
to the last number dialed.
Page 3-16
E
This command defines whether
the G24 echoes the characters
received from the user, (whether
input characters are echoed to
output).
Page 3-275
F
This command is supported for
backward compatibility only, and
has no effect.
Page 3-422
H
This command hangs up, or
terminates a particular call.
Page 3-17
I
This command requests various
G24 information items.
Page 3-6
L
This command is supported for
backward compatibility only, and
has no effect.
Page 3-422
M
This command is supported for
backward compatibility only, and
has no effect.
Page 3-422
N
This command is supported for
backward compatibility only, and
has no effect.
Page 3-422
O
This command returns a phone to
the Online Data mode and issues
a CONNECT or CONNECT
<text> result code.
Page 3-34
P
This command is supported for
backward compatibility only, and
has no effect.
Page 3-422
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page
To Next Page
Loading...
