Motorola G24 Guide User Manual

AT Commands Summary
1-30 AT Commands Reference Manual December 31, 2007
S102 This S-register sets the value of the delay before sending the data to
the terminal.
Page 3-286
+MSCTS This command defines the behavior of the CTS line when the G24 is
in Sleep mode.
Page 3-288
Error Handling Commands
+CMEE This command enables/disables the use of result code +CME
ERROR: <err> as an indication of an error relating to the
functionality of the G24.
Page 3-289
+CEER This command returns an extended error report containing one or
more lines of information text, determined by the manufacturer,
providing the reasons for the
call-clearing errors.
Page 3-296
+MGEER This command returns the PDP context activation reject cause.
Page 3-299
RS232 Multiplexer Commands
+CMUX This command is used to enable/disable the GSM MUX
multiplexing protocol stack.
Page 3-438
User Interface
+CRSM This command provides limited access to the Elementary Files on
the SIM.
Page 3-302
&V This command displays the current active configuration and stored
user profiles.
Page 3-307
&W This command stores the user profile.
Page 3-308
&Y This command displays the default user profile.
Page 3-310
+CKPD This command emulates key presses, or virtual keycodes, as if
entered from the G24 keypad or from a remote handset.
Page 3-310
+MKPD This command enables accessories to control the press and release
of key presses.
Page 3-312
+CMER This command enables an external accessory to receive key press
information from the G24’s internal keypad.
Page 3-314
+CLAN This command handles the selection of language in the ME.
Page 3-315
+CIND This command is used to query the status of various ME indicators.
Page 3-316
+MHDPB This command is used to enable and disable the SEND/END
functionality of the headset dual-position button.
Page 3-318
Unsolicited UI Status Messages
+CKEV This command causes the G24 to send an unsolicited message when
a key is pressed on the G24 keypad, and local key press echo is
enabled.
Page 3-320
+MUPB This command causes the G24 to send an event when a phone book
entry is accessed or modified by the user.
Page 3-322
Table 1-1: AT Commands (Cont.)
AT Command Description Page

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English