Motorola G24 Guide User Manual

AT Commands Summary
1-32 AT Commands Reference Manual December 31, 2007
+MTKP This is both a command and an unsolicited event. The command
responds to an unsolicited event.
Page 3-368
+MTKM This is both a command and an unsolicited event. The command
selects items from the menu.
Page 3-383
+MTKC This unsolicited event notifies the terminal when supplementary
services, SMS Control or Call Control are modified.
Page 3-385
TCP/IP Commands
+MIPCALL This command creates a wireless PPP connection with the GGSN,
and returns a valid dynamic IP for the G24.
Page 3-386
+MIPOPEN This command causes the G24 module to initialize a new socket and
open a connection with a remote side.
Page 3-387
+MIPODM This command causes the G24 module to initialize a new socket in
Online Data Mode and open a connection with a remote side.
Page 3-389
+MIPCLOSE This command causes the G24 module to free the socket
accumulating buffer and disconnect the G24 from a remote side.
Page 3-392
+MIPSETS This command causes the G24 to set a watermark in the
accumulating buffer. When the watermark is reached, data is pushed
from the accumulating buffer into the protocol stack.
Page 3-394
+MIPSEND This command causes the G24 to transmit the data that the terminal
provides, using an existing protocol stack.
Page 3-395
+MIPPUSH This command causes the G24 module to push the data accumulated
in its accumulating buffers into the protocol stack.
Page 3-397
+MIPFLUSH This command causes the G24 module to flush (delete) data
accumulated in its accumulating buffers.
Page 3-398
+MIPRUDP This unsolicited event is sent to the terminal when data is received
from the UDP protocol stack.
Page 3-399
+MIPRTCP This unsolicited event is sent to the terminal when data is received
from the TCP protocol stack.
Page 3-399
+MIPSTAT This unsolicited event is sent to the terminal indicating a change in
link status.
Page 3-400
+MIPDATA
This unsolicited event is sent to the terminal indicating a data
comes from Network when G24 is in pseudo-command
mode.
Page 3-401
+MIPXOFF This unsolicited event is sent to the terminal to stop sending data.
Page 3-401
+MIPXON This unsolicited event is sent to the terminal when the G24 has free
memory in the accumulating buffer.
Page 3-402
+MPING This command will allow verifying IP connectivity to another
remote machine (computer) by sending one or more Internet Control
Message Protocol (ICMP) Echo Request messages.
Page 3-405
+MPINGSTAT This is the unsolicited response that the G24 sends to the terminal to
inform of ping execution status update and provides summary
statistics of ping request when ping request execution is completed.
Page 3-409
Table 1-1: AT Commands (Cont.)
AT Command Description Page

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English