3-115
Printer control parameter 000 ~ 026 : Factory use only
Printer control parameter 027 :
bit
Initial
Setting
Adjust Usage/Comments
7 - Factory use only
6 - Factory use only
5 - Factory use only
4 0 Enable PS3 tray setting
0: No
1: Yes
Set this bit to “1” to customize tray number command on PS3.
For detail setting, see “Printer control parameter 064 ~ 068 :”
on page 3-118.
3 - Factory use only
2 - Factory use only
1 0 Cassette designation
command
0: Default
1: HP
Some default cassette designation commands differ from those
of HP.
To use HP command, set this bit to “1”. The default settings
are on the table below. To customize the tray number
command, see page 3-117.
0 0 Paper size designation
command
0: Default
1: HP
Some default paper size designation commands differ from
those of HP. (See table below.)
To use HP command, set this bit to “1”.
Cassette
PCL5 PCL XL
Default HP Default HP
Auto 7 7 1 1
Bypass tray 2 2 2 2
Cassette 1 1 4 4 3
Cassette 2 4 1 5 4
Cassette 3 5 5 6 5
Cassette 4 8 8 7 7
Paper size
PCL5 PCL XL
Default HP Default HP
Letter 2 2 0 0
Ledger 6 6 4 4
Legal 3 3 1 1
Executive 1 1 3 3
A3 27 27 5 5
A4 26 26 2 2
A5 25 25 16 16
A6 24 24 17 17
F4 114 114 19 -
B4(JIS) 46 46 10 10
B5(JIS) 45 45 11 11
B5 100 100 12 12
B6(JIS) 44 44 18 18
Half Letter 102 102 20 -
COM10 81 81 6 6
Monarch 80 80 7 7
DL 90 90 9 9
Postcard 71 71 14 14
D. Postcard 72 72 15 15
C5 91 91 8 8
Custom 101 101 - -
8K 115 115 21 19
16K 116 116 22 20
Chyou4 117 117 23 -
Kaku2 118 118 24 -
-: No corresponding command
To Next Page
Loading...
Need help?
General
