Printing in a Mac OS Environment 3-74
3.5 Setting Items in the Printer Driver
3
Tips
- The Finisher is required to use the Staple function.
- To use the Punch function:
–TheFinisher C2280FN2 and Punch Kit C2280PUN or the Finisher C2280FN and Punch Kit
C2280PUN are required.
- To use the Fold & Staple function in [Fold & Staple:]:
–The Finisher C2280FN2 and Saddle Stitcher C2280SD are required.
- To use the Half-Fold function in [Fold & Staple:]:
–The Finisher C2280FN2 and Saddle Stitcher C2280SD are required.
- To use the Tri-Fold function in [Fold & Staple:]:
–The Finisher C2280FN2 and Saddle Stitcher C2280SDare required.
[Paper Arrangement:] Select whether to adjust the binding position on two-sided printed sheets
collectively after all data items are received or sequentially each time a data
item is received.
• [Prioritize Arranging Papers]: Paper arrangement is performed once af-
ter all data items are received. All pages are adjusted under the same
conditions.
• [Prioritize Productivity]: Paper arrangement is performed sequentially
while printing the pages.
Settings Description