NARDA SRM-3006 - Useful shortcuts

6 Functions Common to More Than One Operating Mode
92 SRM-3006 Narda
To change operating mode directly:
⇒ Press the Extras softkey, then select the desired operating mode from
the navigation bar on the right.
Note: The RBW values set in the service tables have no function when
parameters are retained as these RBW values are only used in
Safety Evaluation mode.
6.12 Useful shortcuts
You can access several of the main menu functions directly from an
operating mode. The functions and corresponding softkeys are described in
the sections below.
6.12.1 Selecting a service table or a service
Note: Only a service table can be selected in Safety Evaluation mode.
⇒ Press the Extras softkey, then press the Select Service Table or Select
Service softkey.
ª You can now select a service table or a service.
6.12.2 Saving a setup
⇒ Press the Display softkey, then press the Save Setup softkey.
ª The current settings are saved when you have entered a name for the
setup.