NARDA SRM-3006 - SRM-3006 as a laboratory device

1 Introduction
8 SRM-3006 Narda
1.3 SRM-3006 as a laboratory device
Since the SRM-3006 Basic Unit has all the typical features of a spectrum
analyzer, it can also be used in this capacity under laboratory conditions.
Figure 2: SRM-3006 in laboratory use
The SRM-3006 can be integrated into the required measurement
environment directly via the N connector or by means of a cable. The test
generator signals can be fed directly into the basic unit via the N connector.
The SRM-3006 set includes a 1.5 m long cable. A 5 m long cable can be
ordered as an optional accessory (see Ordering Information on page 213).