NARDA SRM-3006 - Switching the device on and off

4 Operation and Basic Settings
Narda SRM-3006 41
4.1.2 Softkeys
The softkey functions depend on the selected menu level, operating mode,
or function. The softkeys are therefore described in the menu and operating
mode descriptions.
4.2 Switching the device on and off
Switching on
⇒ Press and hold down the ON/OFF key for a few seconds.
ª The device switches on.
You can terminate the switch on process by pressing the Quit softkey.
The device performs a self test during the boot up process. The results are
displayed on the screen.
The screen displayed after switch on depends on the setting of the Power
on function. For more information about this, see Changing the switch on
behavior on page 68.
Switching off
⇒ Press and hold down the ON/OFF key for a few seconds.
ª The device switches off.