14 Maintenance and Repairs
168 SRM-3006 Narda
14.1 Changing the battery pack
1. Undo the fixing screw (1) in the lid of the battery compartment.
2. Pull out the battery pack using the tab (2).
3. Hold the tab on the new battery pack and slide the battery pack into the
compartment.
4. Replace the lid of the battery compartment and do up the fixing screw
(finger tight).
Note: If the old battery pack is no longer required, do not simply throw it
away with the normal trash. Dispose of it according to the regulations
applicable in the country of use (also refer to Proper disposal
on page 22).
14.2 Cleaning
• Do not use solvents to clean the Basic Unit, the antennas, or the AC
adapter / charger. We recommend the use of lukewarm water to which a
drop of liquid detergent has been added as cleaning fluid.
• Only use a lightly moistened cloth for cleaning. Water must not get into the
device under any circumstances.
• To avoid spots and drying marks, wipe off the device while it is still damp
with a dry cloth.
1
2
To Next Page
Loading...
