NARDA SRM-3006 - The Navigator Bar; Activating; Deactivating Status and Info Bars

4 Operation and Basic Settings
Narda SRM-3006 45
4.3.3 The navigator bar
The screen displays various elements that make navigation easier and
which give you information about the actual position in the menu and the
selected function.
The actual display mode selection is shown at the left hand edge of the
navigation bar.
Arrow symbols at the right hand edge of the bar indicate further information
which can be displayed by pressing the arrow keys or by turning the rotary
control:
4.3.4 Activating / deactivating status and info bars
The upper status bar, help bar and lower status bar can be individually
activated or deactivated. If you do not need the information that is displayed
in these bars, you can deactivate all of them to maximize the area of the
screen that is available to display the measurement values.
To change the screen arrangement:
✓ You have selected an operating mode.
1. Press the Display softkey.
2. Press the Screen Arrangement softkey.
3. Use the rotary control and softkeys to select the settings you want and
then press the OK key to implement the changes.
Symbol Meaning
Pressing the key displays further information (e.g. in a column of the
table).
Pressing the key displays further information (e.g. in a column of the
table).
Pressing the key as well as the key displays further information.
Paging up by turning the rotary control displays further information (e.g.
lines in the table).
Paging down by turning the rotary control displays further information
(e.g. lines in the table).
Paging up or down by turning the rotary control displays further
information (e.g. lines in the table).