1 Introduction
Narda SRM-3006 5
1.2.1 Basic unit
The SRM-3006 is a field meter that has been specially designed for use
outdoors and in difficult to reach or uncomfortable measurement locations.
The functions of the device have therefore been tailored to ensure ease of
handling in practical situations.
Some of the most outstanding features are:
• Handy sized and light in weight despite a wide range of functions
• Ergonomically shaped non-slip grips ensure that the device can be held
securely and that all controls can be easily reached during the
measurement
• Additional fitting for attaching a wrist strap on the left hand side of the
device
• Large, clear LCD with backlight is easy to read under various lighting
conditions
• Foil keypad ensures reliable operation under poor conditions or when
wearing gloves
• Fast, hassle-free rechargeable battery replacement for longer on-site
operating times
1.2.2 Antennas
The standard contents of a SRM-3006 set usually include a three axis
antenna. This three axis antenna allows quick and simple isotropic
measurements with automatic determination of the three spatial
components of the field to be measured. It too has been designed for use
outdoors and in hard to reach measurement locations (see Ordering
Information on page 213).
Narda Safety Test Solutions also supplies other single axis and three axis
antennas for electric and magnetic field measurements which cover further
applications and lower frequency ranges.
Every Narda antenna is equipped with a control cable in addition to the RF
conductor. This is connected to the Basic Unit by a multi-pin connector, and
transfers the antenna parameters (type, serial number, calibration date, list
of antenna factors) to the Basic Unit so that the SRM-3006 can recognize
and use this data.
To Next Page
Loading...
