NARDA SRM-3006 - Displaying and Selecting the Safety Standards; Displaying and Creating Service Tables

5 The Main Menu
62 SRM-3006 Narda
5.2.9 Displaying and selecting the safety standards
Main Menu • Settings • Standard
⇒ Press the Standard softkey.
ª The available safety standards are listed.
To select a standard:
⇒ Use the rotary control to select an item and press OK to confirm the
selection.
5.2.10 Displaying and creating service tables
Main Menu • Settings • Service Tables
⇒ Press the Service Tables softkey.
ª The available service tables are listed.
Note: Some service table items may not be available for selection because
of the antenna that is being used.
To select a service table:
⇒ Use the rotary control to select an item and press OK to confirm the
selection.
Table 14: Description of Safety Standards list
Item Description
Short Name Short name for the standard (shown on the screen)
Long Name Full name of the standard (shown in the Select menu)
Table 15: Description of Service Tables list
Item Description
Short Name Short name for the service table (shown on the screen)
Long Name Full name of the service table (shown in the Select menu)