NARDA SRM-3006 - Functions Common to More Than One Operating Mode

6 Functions Common to More Than One Operating Mode
Narda SRM-3006 69
6 Functions Common to
More Than One Operating
Mode
This chapter describes the functions that are common to more than one
operating mode. These functions are then indicated in the descriptions of
the individual operating modes by a cross reference to the relevant section
of this chapter.
6.1 Overview of functions common to more than one operating
mode (page 70)
6.2 Setting the resolution bandwidth (RBW) (page 71)
6.3 Setting the measurement range (Meas. Range) (page 72)
6.4 Selecting the result type (Result Type) (page 75)
6.5 The Marker function (page 77)
6.6 Selecting an axis mode (page 84)
6.7 Adjusting the Y axis (page 88)
6.8 Changing the displayed units (page 89)
6.9 Noise suppression (Noise Thresh.) (page 90)
6.10 Measuring spatial average values (Spatial AVG) (page 91)
6.11 Changing operating mode and keeping the same parameters
(page 91)
6.12 Useful shortcuts (page 92)