8 Spectrum Analysis Mode
106 SRM-3006 Narda
8.1 About Spectrum Analysis mode
All the field components in the selected range can be recorded to give an
overview of the detected spectrum or to determine the maximum values in
Spectrum Analysis mode. The extended functions of the device enable
you to perform optimum evaluation of the measured values directly on site.
Marker functions and a peak table are provided for rapid assessment of the
results of spectrum analysis. You can also display the wideband value of the
integrated level for a freely-definable frequency band.
8.2 Basic settings
This section describes the basic settings for the measurement screen.
If the settings are identical in several operating modes, a cross reference will
indicate the appropriate description in Chapter 6, Functions Common to
More Than One Operating Mode on page 69.
To Next Page
Loading...
