NARDA SRM-3006 - Improper use; General hazards

2 Important Safety Instructions
Narda SRM-3006 15
2.4 Improper use
The SRM-3006 is not a warning device that gives indication of the presence
of dangerous fields by means of visible or audible signals.
⇒ Always consider the device as a measuring device, never as a warning
device.
⇒ Always carefully observe the actual measurement value display when
approaching unknown fields.
⇒ In case of doubt, use an additional warning device such as RadMan (XT)
or Nardalert (XT) from Narda Safety Test Solutions.
2.5 General hazards
CAUTION
Hot connector sockets
The connecting sockets can get very warm if the instrument is used
for long periods. This is normal.
⇒ Please be careful when touching the connectors after using the
instrument for a long period of time.