NARDA SRM-3006 - SRM-3006 Sets

19 Ordering Information
214 SRM-3006 Narda
19.1 SRM-3006 sets
The following sets can be ordered:
• SRM-3006, Selective Radiation Meter, Set 1/2, Basic Unit, no antenna
• SRM-3006, Selective Radiation Meter, Set 3/4, Basic Unit plus one
isotropic antenna (800 MHz – 6 GHz)
• SRM-3006, Selective Radiation Meter, Set 5/6, Basic Unit plus two
isotropic antennas
SRM-3006, Selective Radiation Meter, Set 1/2, Basic Unit, no antenna
Selective Radiation Meter, Basic Unit, SRM-3006 with Hardcase
3006/101/E or GER
with Softcase
3006/102/E or GER
(please select
Operating Manual
language)
RF Cable SRM, 9 kHz - 6 GHz, N 50 ohm, 1.5 m (3602/01)
Carrying strap for SRM-3006 Basic Unit (3001/90.02)
Holding strap for SRM-3006 Basic Unit (3001/90.12)
Operating Manual SRM-3006, German or English (please
select)
Power Supply 12 V DC, 100 V – 240 V AC,
universal AC connector (2259/92.04)
Software, SRM-3006 Tools (3006/93.01)
Cable, USB 2.0, Master/Slave - A/B mini (2260/90.55)
SRM-3006, Selective Radiation Meter, Set 3/4, Basic Unit
plus one isotropic antenna (800 MHz-6 GHz)
Selective Radiation Meter, Basic Unit, SRM-3006 with Hardcase
3006/103/E or GER
with Softcase
3006/104/E or GER
(please select
Operating Manual
language)
Antenna, three axis, E-field, 420 MHz – 6 GHz (3502/01)
RF Cable SRM, 9 kHz - 6 GHz, N 50 ohm, 1.5 m (3602/01)
Carrying strap for SRM-3006 Basic Unit (3001/90.02)
Holding strap for SRM-3006 Basic Unit (3001/90.12)
Operating Manual SRM-3006, German or English (please
select)
Power Supply 12 V DC, 100 V – 240 V AC,
universal AC connector (2259/92.04)
Software, SRM-3006 Tools (3006/93.01)
Cable, USB 2.0, Master/Slave - A/B mini (2260/90.55)